Wednesday 29 June 2011

Kitchen Window Etching the techie way!

Now here is my next problem to solve, our house faces a road with nothing but the driveway between whats happening in the kitchen and the passing pedestrians and cars! This became more apparent when I re-fitted the kitchen as I took down the old blind etc.



I looked into electric blinds, however I found they are either huge money, or not really suitable for what I need.

So my solution was to put my vinyl cutter to good use.






I you want to do the same project you will need the following:

For a plain etch:

Window Etch Vinyl - Readily available from many re-sellers or ebay, I picked up a 5m roll for £25

Squeegee - Felt edged is preferred, although I used a teflon one

Sharp knife

Masking tape

Water and washing up liquid

If you want a design cut into it like mine you need:

Vinyl Cutter or access to one, alternatively drop me an email and I can cut you one for a small fee!

Application tape

I will do the instructions for a cut design, if your not cutting it or don't have the access to the kit some of the steps may not be valid.

1. Do some measurements of your window, and decide how high up you want the film to go.

2. Think of a design! (Harder than you think)

3. Create you design using your favourite design package, and export it to your cutting software.

4. Load your etch vinyl into your cutter, I will assume you know how to use the cutter etc.


5. Cut away, then when thats done the laborious task of weeding your "seemed a good idea at the time" design out.


6. In order to be able to apply the vinyl with no bubbles etc to the window you will need to apply application tape to the top of your weeded design.

7. *Important step* Clean the window as best as you possibly can, including the rubber seals around the edge, the application process will draw any dirt etc out.

8. *More important* Measure the window again, exactly! Measure inside the rubber seal, then take 1-2mm off each side for your vinyl measurement, there needs to be a slight border to allow the water out.

9. Take your masking tape and measure out a line of it across your window at the height you want you etch to start from.


10. Cut your vinyl exactly and squarely to match your measurements, this should now fit very nicely into the window.

11. Make up a mixture of washing up liquid and water, I just did this by guesswork and the texture of the liquid i.e slippy to touch, now apply this to the whole area you are going to apply the vinyl to, this will allow the vinyl to move during the early stages.

12. Carefully remove the backing sheet from your etch vinyl, taking care not to get any debris on the sticky side.

13. Gently stick the top edge of the etch exactly below the edge of the masking tape line, take your squeegee and gently work down the vinyl, sticking down the vinyl and working out the air bubbles as you go, this may take some time. You may need to check from the other side of your window as some of the bubbles aren't visible from inside.


Once your happy that its in the right place, no bubbles, etc walk away for 12-24 hours, if your anything like me do not be tempted to peel the application tape back to see, not even a little bit!!!

12-24hrs later! Carefully remove your application layer, very carefully then stand back and admire your work!









Any questions drop me an email

20 comments:

  1. I am really glad to read it and being able to share my thoughts on it. I want to use site opportunity to say that I really love this blog. It is an amazing resource of information for my working. Thank you so much.

    ReplyDelete
  2. Cool if you say so. I liked it but it's certainly not for everybody.

    ReplyDelete
  3. Thanks for this!!!essaymarket.co.uk I would like to see mor epost like this!

    ReplyDelete
  4. I like your post! http://www.online-essay-writer.org/ Very interesting.

    ReplyDelete
  5. I think you will forget my good, through strange the corner of the street. You use uniform skirt is placed, and I said the firm goodbye.

    ReplyDelete
  6. My projects consist of a very small budget.

    ReplyDelete
  7. WOW!!! Thanks for this cool IDEA:)(http://www.masterpapers.com):):) more such like this

    ReplyDelete
  8. This is a very nice blog that I will definitively come back to more times this year! online-essay-writer.org Thanks for informative post.

    ReplyDelete
  9. I always mostly within the vendor stage on the subject of plus it, and also during my personal approach, you understand alright the venue from the and also think your ex thought methods of giving answers to doubts. This web site may suggest by myself pals to give the girl's competency but additionally project selections.

    ReplyDelete
  10. Everyday, funny pictures are used by people for several varying purposes. Pictures can be very entertaining especially in occasions intended to bring fun to those attending them.vintage stores london

    ReplyDelete
  11. Thank you very much for posting and sharing this great Blog. Irvine Pediatrics, located in Irvine, CA, opens its doors to you and your family. Our primary focus is immunizations, newborn care & dietary guidelines.recruitment agencies in Toronto

    ReplyDelete
  12. It is a satisfaction to see your post. This can be well-articulated, sharpened, and also aim. Precisely what important lessons have you found out that an individual applied to this post. Looking forward to go through your experience. Where have you came your own bottom line?vintage clothing London

    ReplyDelete
  13. I’m happy I located this blog! From time to time, students want to cognitive the keys of productive literary essays composing. Your first-class knowledge about this good post can become a proper basis for such people.stratford real estate

    ReplyDelete
  14. I simply want to tell you that I am new to weblog and definitely liked this blog site. I have been meaning to write something like this on my website and you have given me an idea.Podgorica

    ReplyDelete

  15. THANK YOU FOR THE INFORMATION
    PLEASE VISIT US
    wireless cctv camera













    ReplyDelete

  16. 24*7 mobile truck repair in Atlanta.. Premium Truck and Trailer Repair LLC all the truck repair, trailer repair
    , services in Conley, Atlanta. Premium Truck and Trailer Repair LLC offers high quality and cost effective truck and trailer repair services. Our professional truck repair near me can fix your heavy duty truck and trailer for hassle free travel.

    ReplyDelete
  17. Excel Dental
    - Dentist in Langhorne
    offers cosmetic dentistry procedures
    , restorative dentistry
    , affordable dental implants
    including mini dental implants as well as full dental implant
    in Langhorne, Pennsylvania. Book your dental appointment
    for teeth whitening
    for any cosmetic procedures
    in Langhorne, Pennsylvania if you are searching for a general dentist near me

    ReplyDelete
  18. Excel Dental
    - Dentist in Langhorne
    offers cosmetic dentistry procedures
    , restorative dentistry
    , affordable dental implants
    including mini dental implants as well as full dental implant
    in Langhorne, Pennsylvania. Book your dental appointment
    for teeth whitening
    for any cosmetic procedures
    in Langhorne, Pennsylvania if you are searching for a general dentist near me

    ReplyDelete
  19. immigration law firm NJ , providing legal services and representation to clients throughout the state and region. The firm’s practice areas encompass Corporate Law, family law, divorce, and DACA. Our experience enables us to provide the best solutions through creative ways and specific strategies tailored to your legal matter.

    ReplyDelete